KING Off-Road Racing Shocks 250 COIL SPRING 3″ X 16″ X 250lbs. (Sold As Pair)

From the RLLC Garage, we were testing and prototyping with these King Off-Road Shock Coil Springs and never used them. They’ve never been fully mounted, only for a test fitment session so they are practically brand new! We only have this pair, so once they are gone from our garage, they are gone.

King Off-Road Racing Shocks 3.0″ coil springs are for 2.5″ diameter shock bodies.
Manufacturer’s Part Number: SPR3-16-250 (3.16.250.K12)

Specifications:

Coilover Spring Inside Diameter (in.): 3.00in.

Coilover Spring Inside Diameter (mm): 76.2mm

Coilover Spring Length (in.): 14.000in.

Coilover Spring Length (mm): 355.6mm

Progressive Rate Spring: No

Coilover Spring Rate (lbs/in): 250 lbs./in.

Spring Finish: Blue powder coated

SOLD AS A PAIR: $180 + Shipping

King coil springs are manufactured to the King Off-Road specifications in the USA using the finest quality, high tensile, chrome silicon wire available. King springs are specifically wound for off-road applications, not repackaged car springs. King Off-Road spring rates, wire diameters and coil lengths have been developed through extensive real world testing on all types of terrain. King’s race winning designs have been put to the test in the heat of battle from Baja to Dakar. All King Off-Road Racing springs have closed and ground ends to sit flat and deflect true.

Decoding King coil part numbers:

Example: SPR375-22-250

SPR375 = 3.75″ internal diameter spring * fits 3.0″ shock.

22 = 22 inches long.

250 = 250 lbs. spring rate.

The spring rate is a number that represents the amount of force in pounds that it takes to compress the coil 1 inch.