DOBINSONS ADJUSTABLE FRONT POLYURETHANE CASTER BUSHING KIT 0°, 2.5°, 3.5° (PB59-503K)

DOBINSONS ADJUSTABLE FRONT POLYURETHANE CASTER BUSHING KIT 0°, 2.5°, 3.5° (PB59-503K)

• For 0″ to 4″ of lift, Recommended when replacing 20+ year old suspension parts
• Contains all 4 bushings for the front of the radius arm to axle
• Can be set to 3 different caster settings quite easily
• Dobinsons offer other separate bush kits for Caster and Radius Arms. Contact us for more information

PB59-503K Caster Bushing Kit Instructions: pb59-503k

Dobinsons Spring and Suspension Polyurethane bushes have been designed and manufactured from the highest quality raw materials. This PB59-503K Adjustable Front Radius Arm Caster Bushing Kit is designed for the 1990-97 Toyota Land Cruiser 80 Series Wagon and Land Cruiser 105 Series. The kit provides 4 x Polyurethane Eccentric Bushes / Bushings with a built-in sleeve to adjust caster setting from 0° to 2.5° or 3.5° of correction Caster angle plays a major part in vehicle straight line stability and helps the steering to return to center. If the vehicle’s suspension has been raised, the required positive caster angle is reduced and the caster angle moves closer to zero, impairing the vehicles steering stability. A wheel alignment done by a reputable 4×4 wheel alignment center can determine whether caster correction is required. Dobinsons Spring & Suspension offer a full variety of suspension components for this vehicle, including replacement bushings for all control arms front and rear. A complete bush kit is available, part PB59-1258K. Contact Dobinsons for more information. For suspension lift kits between 50mm/2″ and 90mm/3.5″ caster correction is required, and also adjustable panhard rods are highly recommended. For customers wanting to maximize the off-road performance extended sway bar links and extended brake lines are also recommended. Extending the vehicles bump stops and driveshaft modification may also be required depending on the application. For suspension lift kits exceeding 90mm/3.5″ considerable alignment parts are required. Caster correction, adjustable panhard rods, sway bar extensions, extended bump stops, extended brake lines, gearbox spacing, driveshaft modification, adjustable/modified rear trailing arms and adjustable steering arm modifications are required along with other driveline, suspension and steering modifications which may also be required. Note: For Off Road Use Only