Battery Tray Bar With Accessory Plate, Driver Side USDM, 80-Series FZJ80 Toyota Land Cruiser
TRAY NOT INCLUDED – TRAY NOT INCLUDED – USE STOCK TRAY!!!
With such overland adventure pursuits through the whoops and washboards, we’ve been known to bend a Battery Bar or two… Yes, we are talking about the flimsy Toyota Part Number 74453-60060 that we’ve bent a few times. Heavier battery (or multiples) in addition to long-travel suspension has allowed us to go further and faster to remote offroad locations and we’ve arrived to the destination with a bent factory battery bar (or two)! Batteries are paramount for the return trip home, thus we needed something a bit more stronger to hold our batteries in place! Note: What you see in the above photo – no battery box shown in the product photo, thus we do NOT ship this Battery Tray Bar with the factory or aftermarket battery box. See “KIT INCLUDES” noted below.
Here is the Red Line Land Cruisers Battery Tray Bar With Accessory Plate specifically made for the *USDM Driver’s Side of a 80-Series FZJ80 Toyota Land Cruiser, using the factory battery box. Our kit does NOT include the battery box.
*(USDM – US Domestic Market indicates Left Hand Drive)
While we are at it, we may as well make the Battery Tray Bar accessorizable with an Accessory Plate to add electronic switches, fuses and connectors.
The Red Line Land Cruisers Battery Tray Bar With Accessory Plate is made from aluminum. This material choice is a very desirable metal because it is more malleable and elastic than steel and a superior strength-to-weight ratio. Steel is a very tough and resilient metal but cannot generally be pushed to the same extreme dimensional limits as aluminum without cracking or ripping. The thin steel used for the factory Toyota battery bar is very thin and while it works great for light duty offroading, it is simply not beefy enough for our pursuits.
Yes, we made our very own billet aluminum “corner-washers” to help hold everything in place.
We ship you a brand new set of factory Toyota “J-Hooks” and flange nuts as well with the Red Line Battery Tray Bar & Accessory Plate.
ACCESSORY TRAY
With the Accessory Plate, it allows space for fuses and connectors that will tuck out of the way with ample space behind the headlamp.
Battery Tray Bar With Accessory Plate, Driver Side USDM, 80-Series FZJ80 Toyota Land Cruiser
KIT INCLUDES:
• Battery Tray Bar
• Accessory Plate
• Corner Washers
• J-Hooks + Flanged Washers (Toyota)
• Metric hardward to connect Accessory Plate to Tray Bar
• TRAY NOT INCLUDED – USE STOCK TRAY!!!
If you purchase this batter bar, that does NOT include the battery box, and wish to return it, we charge a 20% restocking fee + shipping charges both ways.
WANT DUAL BATTERY SETUP? If your 80-Series is an 1993 – 1997 FZJ80, use the 1991 – 1992 FJ80 Battery Tray for a factory style dual-battery setup:
Battery Tray Bar, Passenger Side USDM, 80-Series FJ80 1991 – 1992 Toyota Land Cruiser
You will need to relocate your windshield washer bottle.
Additional Electrical Accessories:
• BATTERY TERMINAL, ORDNANCE MIL-SPEC BOLT-TYPE LEAD – POSITIVE & NEGATIVE LUGS (IG1-5)
• CIRCUIT BREAKER, 50-Amp / 12-Volt, Type III 50A (EL1-9)
• CIRCUIT BREAKER, 100-Amp / 12-Volt, Type III 100A