Rear Disc Brake Conversion – Semi Float Axle FJ40, FJ60, FJ62, 1980 – 1992 Toyota Land Cruiser
Fits most 15-inch and Larger Disc Brake (not drum) style wheels.
conversion kit includes:
- new calipers with pads, with or without a parking brake
- new 11 9/16″ vented rotors
- stainless steel flexible brake lines
- grade 8 mounting hardware
Optional – Red powder coating on calipers – additional $55.00
(additional 14 to 19 day lead time for powder coating)
Optional – Parking Brake Option or NO Parking Brake Option:
VERIFY YOUR ARE ORDERING THE RIGHT KIT!
Check housing to backing plate bolt hole spacing diagram, against your axle housing.
*When converting from drum to disk, you will need to cut and re-flair your existing hard brake line or bend new ones. These are not supplied. (see note below)
How to determine if your axle is a simi-float or full-float axle.
Note the 8 flange bolts on the full float axle:
When adding the PARKING BRAKE OPTION, parking brake cables should be custom made when changing to the parking brake caliper. The parking caliper cable pulls to the front of the vehicle, not sideways like the stock cable. You will need to have cables made to go from the front and connect to your parking brake cable that comes back to the cross-member. Failure to do this will result in the new parking brake calipers getting out of adjustment.
Control Cable Co. makes cables for any application and can make cables to fit the rear parking brake calipers along with any additional suspension lift in your Land Cruiser. Control Cable makes the nicest cables for your Land Cruiser parking brakes.
Give them a call.
FOR CUSTOM AUTOMOTIVE TYPE BRAKE CABLES CONTACT:
WARNING: Brakes are the single most important system in your vehicle, always consult with a specialist when upgrading anything to your Land Cruiser braking system. It is the sole responsibility of the person installing any brake or suspension component or kit for that particular application. If you are not sure how to safely use this brake / suspension component or kit, you should not install or use it. Do not assume anything! Improperly installed or maintained brakes and or suspension components and systems are dangerous. If you are not sure, get professional help. You may obtain additional information and technical support by calling Red Line Land Cruiser at 719.638.2003, emailing us at “email@example.com” or visiting our website at RedLineLandCruisers.com – Use of Red Line Land Cruisers technical support does not guarantee proper installation. YOU, or the person who does the installation must know how to properly use this product. It is not possible over the phone or email to understand or foresee all the issues that might arise in your installation.
Automotive equipment brakes and suspension must be maintained and should be checked regularly for fatigue, damage and wear.