FJ60 2F SNIPER KIT (STEP 1) Semi Complete Installation Kit, Red Line Land Cruisers – RL1367
$1,998.84
In stock
FJ60 2F SNIPER KIT – STEP 1
We wish we could provide you with a “one-click-buys-all” for the Holley Sniper EFI conversion of your 2F engine in your FJ60 Land Cruiser, but there are variables to consider. However, we have broken it down into just a few steps!
For STEP 1, you have two critical items to verify.
Your FJ60 should be equipped with the factory Oil Cooler. If it is not, most likely your engine has been swapped or modified. Also, your FJ60 2F engine should be equipped with a 2-port coolant head. ALL PARTS LISTED BELOW – See [1] – [9].
A] Does your 2F have an Oil Cooler or not? Why? Our fuel lines are made specifically for each version.
While your FJ60 should be equipped with an oil cooler, we do make fuel lines specifically for each model as some FJ40’s were not equipped with the oil cooler. If your FJ60 does not have the oil cooler, please be aware that your engine may be modified or swapped. We do have the option between the two versions of fuel lines, but we are not including both in this FJ60 Sniper Kit dropdown menu. We ask that you email us directly with a couple of photos of your engine showing the following details; no oil cooler line, block vin number, intake manifold, head vin number. Please write these numbers in the email as well and let us know you are inquiring about installing the Holley Sniper EFI system onto your FJ60. Send the email to info@RedLineLandCruisers.com (Subject) FJ60 Sniper Inquiry & Verification
B] Is your head the factory 2-Port coolant design? Why? If the head is a 3-port design, you can install the Sniper Coolant Temp Sensor directly. But, FJ60’s came with the 2-port design and have a modified Water Housing to adapt the Sniper Temp Sensor – RL1076. (see list below).
IDENTIFY: WHAT CYLINDER HEAD YOU HAVE
Agan, if you find that you have the 3-port design, great, you will save some money, BUT, know that your engine has most likely been modified or swapped. At this point we encourage you to email us directly with a couple of photos of your engine showing the following details; no oil cooler line, block vin number, intake manifold, head vin number. Please write these numbers in the email as well and let us know you are inquiring about installing the Holley Sniper EFI system onto your FJ60. Send the email to info@RedLineLandCruisers.com (Subject) FJ60 Sniper Inquiry & Verification
1] RL1075-A/B Sniper 2F Fuel Line Kit
https://redlinelandcruisers.com/product/2f-fuel-line-kit-bolt-on-holley-sniper
2] RL1076 2F Sniper 4-Bolt Thermo House w/ Sniper Temp Sensor Mod
https://redlinelandcruisers.com/product/2f-sniper-thermo-housing/
3] RL1024_G3 Red Line Holley Sniper 2F EFI Manifold Adapter (Gen.3) with Fenom, Hardware, and Gasket
https://redlinelandcruisers.com/product/red-line-holley-sniper-2f-efi-manifold-adapter-with-fenom/
4] Red Line Velocity Inlets For Holley Sniper 2300 2BBL EFI Headunit – RL1024_vi
https://redlinelandcruisers.com/product/red-line-velocity-inlets-for-holley-sniper-2300-2bbl-efi/
5] RL1029/30 FJ60 2F Air Cleaner Adaptor Kit For Holley Sniper EFI
https://redlinelandcruisers.com/product/fj60-2f-air-cleaner-adapter-kit-
6] RL1025 Red Line Holley Sniper 2F Manifold Throttle Cable Bracket
https://redlinelandcruisers.com/product/red-line-sniper-throttle-cable-manifold-bracket-2f/
7] RL1035 FJ60 Firewall Throttle Cable Bracket For EFI Conversion
https://redlinelandcruisers.com/product/rl1035-fj60-firewall-bracket/
8] 24″ Throttle Cable for FJ60 Sniper EFI Conversion
https://redlinelandcruisers.com/product/sniper-throttle-cable-fj60
9] RL1062 Fuel Filter Plug For 1F / 2F Manifold, Toyota Land Cruiser
https://redlinelandcruisers.com/product/steel-plug-1-8-bspt-male-for-1f-manifold-en4-2/
10] RL1027 Heat Shield, Red Line Sniper 2F Manifold
https://redlinelandcruisers.com/product/rl1027-heat-shield/
11] RL1013 Block Off Plate, F Series Engine (1F / 2F), Mechanical Fuel Pump Delete
https://redlinelandcruisers.com/product/f-engine-block-off-plate/
12] Fixed Orifice PCV Valve for Holley Sniper EFI (SN3-7) RL1393-1F or RL1393-2F
https://redlinelandcruisers.com/product/fixed-orifice-pcv-valve-for-holley-sniper-efi-sn3-7-rl1393-1f-or-rl1393-2f/
| Weight | 16 lbs |
|---|---|
| Dimensions | 18 × 18 × 18 in |
