Axle, Carrier Side Gasket and Hardware Kit, FJ40, FJ60, FJ62, FJ80, FZJ80-Non-E-Loc • RL1245

Are you refurbishing your Toyota Land Cruiser axles? Maybe powder coating them, or you pulled an axle from a salvage yard, the studs are gnawed and need replacing. We use genuine Toyota OEM Hardware and gasket for the Differential side of the axle. Note that two studs are longer than the other eight when doing this job. On the differential housing, you will notice two tall bosses on the “TEQ” side, of which the two long studs will need to locate, so please mark or indicate on the axle housing when replacing the studs as to which two locations are for the long studs. This kit is applicable for FJ40, FJ60, FJ62, FJ80, and FZJ80 with Non-E-Locker Differentials.
NOTE: See that “green locker” on the treads of the studs. We remove it with a wire wheel and use the orange Permatex Threadlocker. WHY? We’ve seen it too many times when installing the stud with green locker, it would load up the threads when installing and gall the metal. The “orange” indicates “High Strength Removable.” We like the liquid solution vs the green paste-type substance.
RL1245 Axle, Carrier Side Gasket and Hardware Kit Includes:
1] Paper Gasket
8] Short Studs
2] Long Studs
10] Spring Washers
10] Nuts
FITS: 1969 – 1996 Toyota Land Cruiser

Axle, Cover Side Gasket and Hardware Kit, FJ40, FJ60, FJ62, FJ80 • RL1246
Axle Diff Pugs – Toyota Land Cruiser – Red Line Land Cruisers

We are showing you three axle plugs and one transmission plug. Why? We will get to that in just a moment. Let’s first establish what is shown here from “left to right: 1, 2, 3, 4.” Read on: https://redlinelandcruisers.com/axle-diff-pugs-toyota-land-cruiser-red-line-land-cruisers/



















