8mm OffSet 80-Series Radius Arm To Chassis Mount Kit
(1990 – 1997) FJ80 & FZJ80 Toyota Land Cruiser 

Maybe you are doing the 80-Series Front Axle Relocation Kit modification to an FJ80 / FZJ80 and looking for that extra 8mm or need to replace your dead rubber factory bushings.  

Radius Arm To Chassis Mount Bushing is made from a proprietary polyurethane mix with up to 8mm offset adjustability. In comparison, rubber bushings are around 60 durometers. These poly-bushings rate at approximately 70 durometers, thus not as “hash” as what you would find on a road-race car or a skateboard wheel, which is around 99a.

In many cases, there is little to no effect of additional noise, vibration, and harshness due to these poly bushings. Your tire noise will “outweigh” any noise (if any) from these bushings, yet the benefits are so worth the price of admission! Durability-wise, the oil will not “melt” these poly bushings like typical factory rubber. And you know your 80-Series is leaking dead dinosaurs back into the earth and taking those worn-out rubber bushing with each drop!

Durometer Shore Hardness Scale – The shore durometer is a device for measuring the hardness of a material, typically polymers, elastomers, and rubbers. Higher numbers on the scale indicate a greater resistance to indentation and, thus, harder materials. Lower numbers indicate less resistance and softer materials. The term is also used to describe a material’s rating on the scale, as in an object having a “‘Shore durometer’ of 90.” The scale was defined by Albert Ferdinand Shore, who developed a suitable device to measure hardness in the 1920s. It was neither the first hardness tester nor the first to be called a durometer (ISV duro- and -meter; attested since the 19th century), but today, that name usually refers to Shore hardness; other devices use other measures that return corresponding results, such as for Rockwell hardness.

See the 80 Series DIY Front Axle Relocation Kit

See the 80 Series DIY Front Axle Relocation Kit – Red Line Land Cruisers