2F/F Reducing Bushing SNIPER EFI COOLANT TEMPERATURE SENSOR RL1086 (FU1-11)

The RL1068 Reducer Bushing is included in our Sniper Kits for 1F, 2F FJ40 and 2F FJ60 kits.
This F/2F Reducer Bushing RL1086 is needed to adapt the Holley Sniper Coolant Temperature Sensor into the 1F or 2F Toyota engine.
You have two choices of installation of the Holley Temp Sensor when converting your F-Series Toyota engine to to EFI.
1] If you have a THREE PORT, coolant port head. See more info down below.
2] If only a TWO PORT, coolant port head, use our Modified Thermostat Housings (F & 2F versions).
SEE OUR SPOTTER GUIDE down below.
• 1F engines should have heads with casting numbers 11101-60050, 11101-60051, or 11101-60052.
• 2F engines should have heads with casting numbers 11101-61020, 11101-61030, or 11101-61031.
If the cylinder head does not have the above-listed casting numbers (3-port heads), use our:
• 1F] 1F with 2-Bolt water housing use: 1F Sniper 2-Bolt Thermo Housing Mod Kit – RL1138
• 2F] 2F with 4-Bolt water housing, use: 2F SNIPER 4-Bolt Thermo House Mod For Sniper Temp Sensor RL1076
The Reducing Bushing is of all-brass construction, machined to allow the 3/8″ NPT Holley Sniper Temp Sensor to use its EFI computer to adjust the head unit in accordance with water temperature.
The Holley Sniper Coolant Temp Sensor is NOT INCLUDED. Simply showing compatibility.
The Holley Temp Sensor itself is included in the Holley EFI system.


Do you have a 2-port or 3-port cooling port head? See our spotters guide:
1F TOYOTA LAND CRUISER ENGINE BLOCK, CYLINDER HEAD & INTAKE MANIFOLD – SPOTTERS GUIDE
All 2F Sniper Accessories Listed Here:

• 2F SNIPER 101 – WHERE TO START FOR YOUR FJ40 TOYOTA LAND CRUISER?
• Add EFI To Your FJ40 Toyota 2F Toyota Engine with the Holley Sniper Kit / Redline Land Cruisers CNC Billet Manifold & Air Filter Adapter Kits
Holley Sniper EFI Installation Tech Tips – Toyota Land Cruiser
https://redlinelandcruisers.com/holley-sniper-efi-installation-tech-tips-toyota-land-cruisers/






















