1983 Toyota Land Cruiser FJ60 Wheels & Tires: Project Snowflake (Part 2)


The previous owner of this FJ60, this rig was rolling on Nankang MudStar Radial M/T 32 x 11.50 x 15 tires mounted on aluminum rims.

Nice beefy look, right?! We know you like this look…

We know if you rolled up on this FJ60 rolling down the road, you would start licking your lips! We know you are in BFB club – BIG FAT BOTTOM Club!
But, there is NOT a V8 under the hood to push these fat meats through the hood or woods!
Can we pose a question to you?

Look at these two stacks of wheels.
Left: Nankang Mudstar 32 x 11.50’s on 15″ aluminum wheels
Right: BFG Mud Terrain 33 x 10.50’s on 15″ factory FJ60 steel wheels
WHICH PILE WEIGHTS THE MOST?
WHICH TIRE COMBO WOULD YOU CHOOSE?
Again, let us remind you, the stock in-line six factory 2F Toyota engine under the hood. The 1983 Toyota Land Cruiser FJ60 features a curb weight of approximately 4,246 lbs. Its 4.2-liter “2F” inline-six engine produces a power output of 135 horsepower and 210 lb-ft of torque – on it’s best day! This vehicle is now 43-years old!
We are choosing to run the skinnier BFG Mud Terrain 33 x 10.50’s on 15″ factory FJ60 steel wheels.

Look at this beauty! Yes, we LOVE the skinny tire look! But skinny tires are all about the FUNCTION! Hence, our tag line, “The Function is the Fashion!” Skinny tires is less wear on ball joints. Skinny tires do not kill your scrub radius.
Why Scrub Radius Matters
Driver Feedback & Feel: A positive scrub radius (where the steering axis intersects inside the tire centerline) generally provides better road feel and responsiveness.
Braking Stability: Many vehicles, particularly front-wheel-drive cars, use a negative scrub radius (axis intersects outside the tire). This prevents the car from darting or pulling violently if braking effort is uneven left-to-right.
Torque Steer & Tramlining: An excessive scrub radius—whether positive or negative—makes the steering highly sensitive to potholes and uneven surfaces (tramlining). Tramlining is the tendency for a vehicle’s tires to get pulled into the ruts, grooves, or seams of the road, causing the car to “steer itself”. Named after street trams following fixed rails, it makes the steering feel jerky or stubborn when trying to change lanes on uneven pavement.
This is why the wide tires like to grab all the imperfection in the road and in the dirt, they like to grab rut sidewalls. And there is our slapshot! Some people like to be guided through, towed through, driven for – whereas some are drivers and wish to make their own driving line choice. Skinny tires are for drivers who like to drive!
WHEEL WEIGHT – ROTATIONAL MASS

ABOVE: Nankang Mudstar 32 x 11.50’s on 15″ aluminum wheels = 72 pounds.
BELOW: BFG Mud Terrain 33 x 10.50’s on 15″ factory FJ60 steel wheels = 71 pounds.

1:1:1 One pound less (per wheel) One inch gained in the height of the tire and one inch narrower. YES PLEASE!
Why does wheel weight matter? Because Rotational Mass and the mathematical formula!
Rotational mass on wheels matters because it requires extra energy both to get the wheel spinning and to stop it. A heavier wheel or one with heavy material at the outer edge acts like a flywheel, meaning our 2F Land Cruiser engine must work significantly harder to change speed.
The effect of wheel weight depends on vehicle dynamics in several key ways:
Acceleration and Braking: Every pound added to the outer rim of a wheel fights acceleration twice: once to move the car/bike forward, and once to spin the mass up. Because of this, reducing 1 pound of rotational weight at the outer edge can have roughly the equivalent performance benefit of removing 2 to 3 pounds of static weight (e.g., from the frame or interior). We could get even more technical about all this by weighing the individual wheels and the tires as the heavy rubber is the outer most part of the rotational mass. But this is something for you to think about when choosing your wheel and tire package for your Land Cruiser.
Handling and Unsprung Weight: Wheels are classified as unsprung mass, meaning they are not supported by the vehicle’s suspension. Heavier wheels make it more difficult for the suspension to quickly react to bumps, which can reduce tire grip, cornering performance, and ride comfort.
Weight Distribution: Where the weight is located matters just as much as the total weight. A lighter tire or a forged rim concentrates less mass at the outer diameter, significantly lowering the “moment of inertia” and making the wheel much easier to turn and accelerate. Again, we are working with a Land Cruiser making 135 hp (at best in 1983), that is now 42 years old!
Yes, there is the potential for a 17″ tire to weight less than the same size tire in 15,” but this is not the only consideration of choice. Everything is a sliding scale of sacrifice. With this particular scenario, we like the 15″ tire for the sidewall “cushion” over a 17″ tire’s shorter sidewall. But everything has to be evaluated – again, sliding scale. We are just providing “food for thought” and yes, we do have our opinion, “The Perfect Wheel and Tire Package for FJ40 Toyota Land Cruiser.” We are confident with time, we will also have our opinion formed as to what wheel and tire for the FJ60. For now, we are loving the factory FJ60 wheels!
Fun fact: This “chrome” FJ60 wheel is different than the 1980 – 1983 white FJ40 wheel. Both are of the same six-spoke “wagon wheel” design.


Project: Snowflake – our 1983 FJ60 Toyota Land Cruiser is looking quite proper on this wheel tire combination… FOR NOW!
written by: Rodney Wills
______________________________________________________________
NEXT: When we replace our tires, what tires will we choose for our FJ60?
See our Toyota Land Cruiser FJ60 Tire Size & Buyers Guide, Project Snowflake, [Part 3] Red Line Land Cruisers
[Part 1] Project: SNOWFLAKE, 1983 FJ60 Toyota Land Cruiser by Red Line Land Cruisers
